There is no denying that hardwood furniture is beautiful in itself. Unfortunately, these hardwood pieces are susceptible to damages over time. But in this Watco Teak Oil review, I am going to tell you, how to keep your hardwood furniture look like brand new.
Using teak oil on your hardwood pieces have many benefits. It not only protects your furniture from getting damaged but also prevents it from getting stained or dirty.
As a result, you can keep your furniture new like for a long time.
In this review, I will discuss everything you need to know before buying the product. So, without wasting any time, let’s get started.
Watco Teak Oil Finnish Introduction
Watco Teak Oil is produced by Rust-Oleum and is a special formula that is made for more dense woods including rosewood, mahogany, and teak. Unlike other oil, it can penetrate deeper in the wood pores and thus, give it a richer look.
The specialty of this oil finish is that no other oil can give you the same professional-looking results. The warm glow finish on the wood makes it look new.
Treating your hardwood furniture with teak oil is very easy. All you have to do is simply apply it by spraying or brushing it over the wooden surface. The oil then penetrates deeper into the woods.
This provides extra protection for your wooden furniture. With the use of teak oil, you can enhance the natural texture of the wood.
Unlike other oil, it is fast-acting and easy to apply. It is designed to protect against sunlight and moisture.
You can apply this teak oil from Watco to prevent your wooden furniture to get stained. Not just that but it is also good for maintaining the natural look of the wood.
Watco Teak Oil Finish Main Benefits
Watco Teak Oil has many benefits to offer. This is why they make the first choice for fine woodworkers. However, it is also used by novices to get a rich, natural look.
1. Protection Against Moisture and UV
It protects your wooden furniture from elements like sunlight/UV and moisture.
UV rays and moisture are the two worst enemies of wood. But with the help of this oil, you can protect your furniture from getting damaged over time. Not just that but it will also prevent staining of your furniture.
If you want to bring out the natural feel of the wood, I would suggest you apply one or two coats of this oil.
I have heard many of them using this teak oil to extend the lifespan of their furniture.
2. Easy to Apply
The good thing about this teak oil is that it is easy to apply. You can apply it using your hand or even spray it.
However, I would suggest you to simply brush it over the wooden surface. Unlike other oil, it doesn’t take much time to apply the oil.
With the application of this oil, you will get the finest results you are looking for.
3. Fast Acting
Usually, you have to wait for hours after applying oil on your furniture. But with Watco Teak Oil, you don’t have to wait much.
This is a fast-acting oil that dries up within an hour of application. It doesn’t take forever to dry.
However, you should always make sure that it has dried completely, before starting to use your furniture. After all, you wouldn’t want to ruin the finish.
4. Can be used on Marine Vessels
Another benefit is that it can be used on marine vessels as well.
This oil can be applied to wooden boats. However, it should be above the waterline. This is why it is preferred by marine vessel owners.
What can be used for?
Another good thing about Watco Teak Oil is that you can use it for a variety of purposes. It’s one of the most versatile oils you will find.
1. Outdoor furniture
It has very good resistance against mold and water. This makes it an ideal choice to be applied to outdoor furniture.
You can apply it on your poolside, patio, garden and all other outdoor furniture pieces that you have. It will not only keep your outdoor furniture protected but also extend their lifespan.
2. Indoor furniture
This teak oil from Watco is not only suitable for outdoor furniture, but you can even use it for your indoor pieces.
I have heard many people applying it on their tables, chairs, benches and other furniture that are used inside the house.
You must have seen that the porch or pool deck is made of teak. This means you can apply it to your deck as well.
The main advantage of using it is that it lasts longer than any other oil. also, it will give you the perfect finish that you want.
As mentioned above, it can also be applied to marine vessels. You can use it on a wooden boat.
How to apply Watco teak oil?
Teak oil can be applied in three main ways by wiping, spraying or brushing.
However, I find brushing to be the best method. I have described the steps below for your help.
- Before starting, make sure that you have everything you need. This includes a brush, face mask, and gloves for protection and old rags of cloth to spread on the floor.
- Now you need to clean your furniture. Get rid of all the grime and dirt using soap water. Before applying the oil, you need to let it dry for 24 hours.
- Once your furniture is ready, take a brush and apply it gently. Make sure that you are using a brush with soft bristles.
- After you are done, wipe up the spills and drops. You can use a clean cloth and mineral to remove it.
Well, that’s how you apply it to your furniture. You should continue to apply the oil every few weeks to keep your furniture look brand new.
Watco Teak Oil Ingredients
To make a great product, you need great ingredients. The good thing is that it has all such ingredients that make it the best.
For those who think that teak oils are made from teak, it is nothing more than a myth. They are just called that.
This oil is a mix of tung oil, linseed oil, mineral oil, and solvents. Ingredients include:
- Naphtha, Petroleum, Hydrotreated Light
- Rosin Adduct Ester
- Stoddard Solvent
- Solvent Naphtha, Light Aromatic
- Mineral Spirits
- 3-Iodo-2-Propynyl Butyl Carbamate
- Bis (1,2,2,6,6-Pentamethyl-4-Piperidinyl) Sebacate
- Methyl Ethyl Ketoxime
How much do I need it?
The amount of oil you will need is completely dependent on the size of your project and also the number of layers you will apply.
Watco teak oil is available in three different sizes including:
- Pint – Can cover up to 85 sq ft
- Quart – Can cover up to 170 sq ft
- 1 Gallon – Can cover up to 680 sq ft
When it comes to applying teak oil, you have to apply multiple layers. You should select the size keeping this in mind.
I would recommend you to opt for a bigger package as it comes cheaper.
The good thing about this oil is that it lasts up to 3 years. This means you can use a single container of oil for a long time.
Frequently Asked Questions
Can I use to paint a teak countertop or chop board?
You shouldn’t use this oil to paint your countertop or chop board. That’s because it is not food safe and also not considered to be good for your health. Instead, you should go for butcher block treatment or white mineral oil.
What is the difference between teak oil and tung oil?
Teak oil is designed to protect your furniture. It can penetrate deeper into the wood. However, it cannot give you finish like tung oil. Tung oil is known to contain some poly in it. After applying multiple coats of the oil, it gives you a surface finish. Teak oil will give your furniture a darker warm tone.
Is teak oil flammable?
Yes, teak oil is highly flammable. No matter what teak oil you are using, they are all flammable. This is why you should take safety precautions while using it. You are advised to keep all the rugs in a metal bucket containing water and also use an airtight lid to cover it. Or else, it can lead to spontaneous combustion.
Watco Teak Oil is one of the best teak oils you will find. It is not only easy to apply but it can also keep your furniture protected. By applying regular coats of Watco Teak oil, you can prevent the color from fading. It provides all-round protection to your furniture. The best part is that you can use it for a wide range of products.